Tips

How to Safely Use a Saw-Splitting Machine – 2021 Guide

Img source: uniforest.de
Written by Quentin Hack

When you are using any woodworking machine, it is necessary to use it safely. There is a high risk of accidents and hence, can severely injure you. When you handle these machines with care, you will not only do your job efficiently but also safeguard yourself. Such equipment is quite dangerous to handle, but with caution, you can do your tasks with ease.

Visit this site to get the detailed information regarding different equipment and how you can safely handle them. Today, we will discuss specific tips to handle the equipment and how one can use them with complete care. After going through all the crucial tips, you will learn different safe ways to use this machine efficiently.

Safety Tips

  1. Safeguard your eyes by wearing eye protection while handling such a dangerous machine. You can also wear ear protection along with a dust mask to protect yourself from wood dust.
  2. Avoid wearing loose clothing or any jewelry or that can be pulled easily by the saw.
  3. Check blade sharpness to make it work better.
  4. Change the blades whenever the power is off.
  5. Set the depth of cutting so that it won’t slice other things.
  6. Control the machine with both hands so that it does not harm you or any object.
  7. Let the saw stop before you place it on the floor.

How to Safely Use a Saw-Splitting Machine?

Img source: uniforest.de

  • Mark Accurately

It is essential to know what you want to cut through this machine. Therefore, you need to mark accurately with the help of measuring tape. Take a pencil for marking and create a single line to avoid any confusion. You can also mark the scrap part and throw it later. 

You can put the scrap side off the table so that part will automatically fall from the table when you cut the board. One needs to be cautious while marking because you will not get it in the same condition once you cut the board.

  • Sharp Chalk Lines

If you need to make straight lines on the board quickly, then you need to use the chalk line. Before you make the perfect lines on the wood, you can quickly create the mid-air twang. It will be simple for you to follow the chalk line and draw accurate straight lines over it. You can get rid of it also by wiping it off.

  • Lightly Cut the Board

After marking, it is essential to cut the board lightly to check whether you are going in the right direction. Before you pull the trigger for deep cutting, you need to check it for some seconds. 

Sometimes, the shadow of the machine makes the marking invisible, and you won’t be able to see the markings correctly. The light cut is to ensure that you are going well.

Img source: uniforest.de

  • Focus on the Blade and Line You Cut

When you cut the board by using a machine, the wood dust covers the line, and hence, you will find it difficult to see the line and cut it. You need to focus on the blade and its direction where it is going. 

Make sure that you also see the markings to correct the board in the right way. In some saw-splitting machines, a blower is also present, clearing the dust away and allowing you to see everything.

  • Use Tape Before Marking

If you are cutting any dark-colored wood, then you may not see the lines drawn by a pencil. Instead, you can use tape and draw lines over it. The pencil marks are quite clear on light-colored tape, and hence, it is the perfect way to do the job. There are chances of reducing splintering.  

  • Quickly Cut Similar Lines

If you want to cut different boards of the same length, in the same way, you need to mark them once. Within a single mark, you can cut all those boards easily and quickly. The process will take less time, and you will also complete your tasks efficiently.

Img source: uniforest.de

  • Use Cutting Pad

You can use a cutting pad made up of foam to lay the wood board over it. You can easily cut the board while sitting on your knees. In this way, you will get better sightlines. It is okay if you cut the foam while doing your work. 

You easily re-join the pieces with the help of duct tape. It will cause hinges, and hence, it will be easy for you to fold the foam and store it in any compact place.  

  • Follow the Guide

If you do not understand how to use this machine, it is better to follow it. The manual is available with every piece of equipment, and you can take help from it. But if you do not have one, then you can ask for help from an experienced person. Plenty of online tutorials are there that can also help you to use the saw-splitting machine safely.

  • Cut Curves Safely and Accurately

It is possible to cut curves on the board by using a saw-splitting machine. You can get the same result as the jigsaw. The cuts can be deep through the wood. But if the cut is deep, then it will be a bit complicated for you to cut. If you are cutting any thick material, then it is better to go at least twice for a proper finish.

The Bottom Line

A saw-splitting machine is a dangerous equipment, and it is vital to handle with care and caution. In the beginning, you may not be too fast to do your jobs, but once you learn everything, then you can easily cut anything accurately. Follow all the tips mentioned earlier to ensure your safety. 

It is quite possible to take help from the guide so that you can understand various techniques and operate them well. You need to handle the equipment safely to ensure your safety and not damage nearby objects. The blades are too sharp and can cause severe injuries. Protect yourself from blades and wood dust and do your cutting job accurately.

About the author

Quentin Hack